Cooper M3000 Guide de l'utilisateur télécharger pdf (Page 360)

9-16 SPARC Enterprise Mx000 Servers XSCF User’s Guide • December 2010

Setting System

TABLE 9-10 lists the functions for the network configuration of XSCF. Select

[Settings]-[Network]-[Current] or [Settings]-[Network]-[Reserve] in the Menu tree. You can

make the network configuration from both [Current] and [Reserve] menus. The [Current]

menu displays the XSCF network information which is running on the server, and the

[Reserve] menu can be used to confirm the data you configured. Click the [Apply] and

[Reboot] buttons on the [Reserve] menu to apply the setting values of network configuration.

TABLE 9-10 Network Configuration (1 of 2)

Menu Function Remarks

Current XSCF network information and status display,

and XSCF network configuration

Displays the XSCF network information and status

which is running on the server.

This function is equivalent to the shownetwork(8) and

showhostname(8) commands.

Also, this function sets each host name, domain name,

IP address, netmask, and enabling/disabling of the

XSCF network interface.

This function is equivalent to the setnetwork(8) and

sethostname(8) commands.

You can confirm the settings from the [Reserve] menu.

Route display and configuration Displays the current routing, and configures the routing.

This function is equivalent to the showroute(8) and

setroute(8) commands.

You can confirm the settings from the [Reserve] menu.

DNS display and configuration Displays the current name server and search path, and

configures the name server and the search path.

This function is equivalent to the shownameserver(8)

and setnameserver(8) commands.

You can confirm the settings from the [Reserve] menu.

Reserve XSCF network configuration information

display and configuration

Displays the XSCF network configuration information.

This function is equivalent to the applynetwork(8)

command.

Also, this function sets each host name, domain name,

IP address, netmask, and enabling/disabling of the

XSCF network interface.

This function is equivalent to the setnetwork(8) and

sethostname(8) commands.

1 2 ... 355 356 357 358 359 360 361 362 363 364 365 ... 431 432

Pas de commentaire

Cooper M3000 Guide de l'utilisateur Page 360