Cooper M3000 Guide de l'utilisateur télécharger pdf (Page 27)

Chapter 1 XSCF Overview 1-11

■ Automatically shut down and cancel a power on operation when an error is detected

If a system abnormality occurs, the Oracle Solaris OS is automatically shut down, and the

subsequent power on will not be started. This can minimize damage to the system.

■ Control power during power failure and power restoration

XSCF performs the following operations when a power failure occurs that causes the

system to turn off:

■ When a power failure occurs:

XSCF performs emergency power off when the power failure occurs. When a UPS is

connected, any running domains may also be shut down automatically. For a momentary

power failure, XSCF may allow the system to continue working without any shutting

down.

■ When power is restored:

The system can be set up such that XSCF automatically turns on the power to the server,

then starts up the domains, relieving the system administrator of extra work.

For details on operation settings for a power failure, see Section 4.4.10, “Shutdown Wait

Time Administration” on page 4-22.

Support of Hot-Swapping of Components

XSCF supports maintenance work with the XSCF Shell during hot-swapping of components.

For details on the XSCF Shell, see Chapter 5.

Component Configuration Recognition and Temperature/Voltage

Monitoring

XSCF monitors component information such as the configuration status and the serial

numbers of components in the server. If an abnormality is detected in the component

configuration, it is displayed and reported to the user. XSCF periodically monitors and

displays the temperature inside the server, the ambient temperature, component temperatures,

voltage levels, and FAN status.

Internal Cabinet Configuration, Recognition, and Domain Configuration

Control Functions

To use XSCF, you can display the system configuration status, and create and change domain

configuration definitions. It also provides domain start and stop functions, mainly for its own

use. In the server, the user can configure a domain as a single Physical System Board (PSB)

that has CPU, memory, and I/O device, or a PSB logically divided, which are the eXtended

System Boards: (XSBs). The user assigns a domain and the Logical System Boards (LSBs)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 431 432

Pas de commentaire

Cooper M3000 Guide de l'utilisateur Page 27