Cooper Menvier 100 Guide de l'utilisateur télécharger pdf (Page 35)

Menvier40/100 Technical Specification

Page 31

Capacities (Menvier100)

Zones

100 max (with expanders)

Outputs

100 max (with expanders)

Expanders and

Wired Keypads

45 max devices (see note)

Radio Keypads

10 max (two per radio

expander)

External Radio

Sirens

10 max (two per radio

expander)

WAMs

10 max (two per radio

expander, repeater mode

only)

Wards

10

Calendar Set

Timers

10 max

Log capacity

Up to 1,250 events: 1,000

mandatory events, 250 non-

mandatory. Stored in

EEPROM memory, available

for at least 10 years without

power.

User Codes

250 (plus installer code)

Remote controls

250 (one per user)

Radio Hold Up

Devices

250 (one per user)

Proximity tags

250 (one per user)

Note: Wired keypads, wired zone

expanders, and radio zone expanders are

all bus devices. You can connect any

combination of these devices to the bus.

Capacities (Both)

Outputs

16 plug-by communicator

outputs plus 3 wired on

control unit (two transistor

and one relay)

4 transistor based on each

wired expander

8 radio outputs on each

768/769

2 radio outputs on each 762

Radio Keypads

5 max (two per radio

expander)

Loudspeakers

1 on control unit, one per

expander

Plug on

communication

modules

One

Other ports

1 x USB, 1 x Ethernet

Internal Clock

±10 minutes over one year.

Notes:

1. Wired keypads, wired zone expanders,

and radio zone expanders are all bus

devices. You can connect any

combination of these devices to the bus.

2. The system can be used as EITHER a

ward based system OR a part setting

system. When used as a part setting

system there are four setting levels

available: Full Set and Part Sets B, C and

D.

Security

Security

Grade

Grade 2 or 3

Radio

detector

differs

16,777,214 (2

24

-2).

Radio

Supervision

Programmable.

Number of

access codes

100 plus one installer

Access code

differs

10,000 differs with 4 digit

codes.

1,000,000 differs with six

digit codes.

All digits may be any

number 0 to 9.

Code blocking

Blocked for 90s after 10

incorrect codes in series.

Proximity tag

differs

4,294,967,296 (2

32

)

Power Supply

This product complies with the requirements of

EN50131-6 Type A power supply at Grade 3 and

environmental class 2.

Power supply type

A

Mains power supply

requirements

230VAC +10%/-15%,

170mA max, 50Hz.

Total power supply

capacity:

1.5A

(of which 750mA is

used for battery

recharge and 750mA

is available for

powering the

system).

12V Aux supply*:

500mA max

12V Bell supply

500mA max

Comms power

supply*:

400mA max

12V Expander

Bus*:

400mA max

LS connectors

280mA in alarm.

*Note: The ratings given here represent the

maximum current that can be drawn before

triggering over-current protection.

EN50131-6 ratings

The control unit provides space for one

17Ah battery.

Under EN50131-6 for Security Grade 3

installations the required battery standby

time is 60 hours. However, with an ATS4

1 2 ... 30 31 32 33 34 35 36 37 38

Commentaires sur ces manuels

Pas de commentaire